Temperature: 400°
Time: 50 Seconds
Pressure: Light to Medium

1. Prepare your artwork and transfer with consideration to the size of the Tee shirt.
2. Spread a teflon sheet (or white paper) on the bottom of the press.

3. Slide a teflon sheet inside the shirt to protect the back of the shirt from sublimation
4. Place the shirt, face-up, on the platform, smoothing out folds and wrinkles.
5. Place the transfer, face-down, in position on the shirt.
6. Cover the shirt and transfer with a teflon sheet, assuring the transfer and shirt remain in position.

6. Press with medium pressure 50 seconds.

7. Remove the shirt from the press.
8. Allow to cool on a clean surface.

Additional notes:
1. Please take note of the variation of printable areas from shirt size to shirt size. You may need to adjust your transfer size for each shirt size or design a size that will suit all sizes.
2. You may choose to “pre-press” your garment for 5 seconds to remove and moisture that may be present.
3. A lint brusher or roller will remove any clinging debris that may compromise your imaging.