Temperature: 400°
Time: 60-70 Seconds
Pressure: Medium

1. Prepare your artwork and transfer with consideration to the size of the mouse pad.
2. Using heat resistant tape, fasten the mouse pad in position facing the printed side of the transfer.

3. Spread a teflon sheet (or white paper) on the bottom of the press.
4. Place the mouse pad with transfer on the platform with the transfer facing down.
5. Cover transfer with teflon sheet (or white paper)

6. Press with medium pressure for 60-70 seconds.

7. Remove the mouse pad and transfer from the press.
8. Slowly peel the tape and transfer from the mouse pad.
9. Place in a clean, dry place to cool.