Global Sublimation Ink

Section 2F: How to make UniSub Polyester Flags

Temperature: 400°
Time: 45-50 Seconds
Pressure: Medium

1. Prepare your artwork and transfer with consideration to the size and shape of the flag.
2. Make sure both the transfer and the flags are dry and free of debris.
3. Using heat resistant tape, fasten the flag in position facing the printed side of the transfer.
5. Spread a teflon sheet (or white paper) on the bottom of the press.
6. Place the flag with transfer on the platform with the transfer facing down.
7. Cover transfer with teflon sheet (or white paper)
8. Press with medium pressure for 45-50 seconds.
9. Remove the flag and transfer from the press.
10. Slowly peel the tape and transfer from the flag.
9. Allow to cool on a clean surface.

Photography:
a. Fastening flag to transfer
b. Partial covering of teflon over flag/transfer on press
c. Closing of press
d. Removing flag from press
e. Removing transfer from flag
f. Completed flag

Buy Flags